3M™ Cushion-Mount™ Plus Plate Mounting Tape E1020H, White, 18 in x 25 yd, 20 mil, 1 roll per case
$592.37
- Buy 5 for $573.71 each and save 3%
- Buy 10 for $550.39 each and save 7%
- 0.020 inch (0.51 mm) double coated foam tape has the air release feature with a plate side adhesive technology designed to resist edge lifting on flexographic print plates
- Has a standard medium density foam that is ideal for printing combinations of solids and process with halftone dots. The white foam color indicates the standard, medium density foam
- Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
- Has higher plate side adhesion for challenging print conditions that use thick plates or small print sleeves
- Print plates mounted on E1020H will have no air bubbles under the plate due to the air release feature designed into the tape
- Grooves in the adhesive are created by a cross-hatch pattern from the release liner
- Plate demounts from the double coated cushioned tape without adhesive residue
- Tape also removes cleanly from the sleeve or steel print cylinder
- Flexographic printing, flexographic printers
- Cushioned flexographic plate mounting sticky back foam tape
Manufacturer
3M
SKU
70002019548
Selling Unit
RO
Part
55058
UPC
50021200550589
Stock
7000042357
Grand Total : $592.37
Our 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1020H with easy mount adhesive is designed for mounting flexographic print plates to cylinders or sleeves. This white foam mounting tape provides high quality standard combination print.
| stock | 7000042357 |
|---|---|
| Part Number | 55058 |
| UPC | 50021200550589 |
| Unit of Measure | RO |
| Backing Material | Polyethylene Foam |
| Thickness | 22 |
| Applications | Flexographic Plate Mounting |
| Length | 25 |
| Length Metric | 23 |
| Thickness Metric | 0.56 |
| Width | 18 |
| Width Metric | 457 |
| Benefit1 | 0.020 inch (0.51 mm) double coated foam tape has the air release feature with a plate side adhesive technology designed to resist edge lifting on flexographic print plates |
| Benefit2 | Has a standard medium density foam that is ideal for printing combinations of solids and process with halftone dots. The white foam color indicates the standard, medium density foam |
| Benefit3 | Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing |
| Benefit4 | Has higher plate side adhesion for challenging print conditions that use thick plates or small print sleeves |
| Benefit5 | Print plates mounted on E1020H will have no air bubbles under the plate due to the air release feature designed into the tape |
| Benefit6 | Grooves in the adhesive are created by a cross-hatch pattern from the release liner |
| Benefit7 | Plate demounts from the double coated cushioned tape without adhesive residue |
| Benefit8 | Tape also removes cleanly from the sleeve or steel print cylinder |
| Benefit9 | Flexographic printing, flexographic printers |
| Benefit10 | Cushioned flexographic plate mounting sticky back foam tape |
| Adhesive Type | Differential Acrylate |
| Type | simple |
| Product Form | Roll |
| Shelf Life | 730 |