Standard Abrasives™ Buff and Blend Combi-Wheel 898011, 3 in x 2 in x 1/4 in A VFN 180, 5 per inner 50 per case
Stock : 7000122226
List:
$41.50
/EA
Your Price:
$31.62
/EA
- Buy 25 for $30.63 each and save 3%
- Buy 50 for $29.38 each and save 7%
Quantity Guidelines:
Priced per EAs, must be ordered in multiples of 5.
Grand Total : $158.10
Manufacturer :
3M
SKU :
66000101494
Part :
42549
UPC :
00051115425493
Selling Unit :
EA
Stock :
7000122226
- Blends, cleans, and finishes on ferrous and non-ferrous materials when a linear scratch pattern is required
- Useful for satin finishing on large contoured surfaces
- Resin coated non-woven mesh material runs cool and resists smearing
- 1/4? (6mm) permanently affixed shank enables easy use on a small straight grinder or flat finisher (for larger wheels)
- Steel shank helps maintain smooth running and ease of control for off-hand operations
- Addition of coated flaps produces a sharper cut than a completely non-woven brush
For added cut, we designed our Standard Abrasives™ Buff and Blend Combi-Wheel with alternating flaps of Buff and Blend non-woven GP material and coated abrasive resin bonded material. The combination of flaps blends and removes contaminants more aggressively than a non-woven brush, while producing a uniform final finish with a linear scratch pattern.
| Type | simple |
|---|---|
| Product Form | Wheel |
| Inner Box | CT |
| Shelf Life | 3650 |
| Max RPM | 12000 RPM |
| Attachment Type | Shaft |
| Diameter | 3 |
| Backing Material | Non-Woven |
| Diameter Metric | 76.2 |
| Form Type | Combi |
| Grade | Very Fine |
| Mineral Type | Aluminum Oxide |
| Shank Size | 0.25 in |
| Shank Size Metric | 6.35 mm |
| Shape | Wheel |
| Diameter | 3 |
| Width | 2 |
| Width Metric | 50.8 |
| Benefit1 | Blends, cleans, and finishes on ferrous and non-ferrous materials when a linear scratch pattern is required |
| Grit | ClassificationAttributeValue.MM_GL_GRADE_180 |
| Benefit2 | Useful for satin finishing on large contoured surfaces |
| Benefit3 | Resin coated non-woven mesh material runs cool and resists smearing |
| Benefit4 | 1/4? (6mm) permanently affixed shank enables easy use on a small straight grinder or flat finisher (for larger wheels) |
| Benefit5 | Steel shank helps maintain smooth running and ease of control for off-hand operations |
| Benefit6 | Addition of coated flaps produces a sharper cut than a completely non-woven brush |
| Shank Size | 0.25 in |
| Shape | Wheel |
| MSDS Sheets | https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMYtZnx2B4v70k17zHvu9lxtD7SSSSSS-- |
