Standard Abrasives™ Buff and Blend Combi-Wheel 898002, 2 in x 1 in x 1/4 in A VFN 120, 10 per inner 100 per case
$15.09
- Buy 50 for $14.62 each and save 3%
- Buy 100 for $14.03 each and save 7%
- Blends, cleans, and finishes on ferrous and non-ferrous materials when a linear scratch pattern is required
- Useful for satin finishing on large contoured surfaces
- Resin coated non-woven mesh material runs cool and resists smearing
- 1/4? (6mm) permanently affixed shank enables easy use on a small straight grinder or flat finisher (for larger wheels)
- Steel shank helps maintain smooth running and ease of control for off-hand operations
- Addition of coated flaps produces a sharper cut than a completely non-woven brush
Manufacturer
3M
SKU
66000101445
Selling Unit
EA
Part
42544
UPC
00051115425448
Stock
7000122222
Grand Total : $150.90
For added cut, we designed our Standard Abrasives™ Buff and Blend Combi-Wheel with alternating flaps of Buff and Blend non-woven GP material and coated abrasive resin bonded material. The combination of flaps blends and removes contaminants more aggressively than a non-woven brush, while producing a uniform final finish with a linear scratch pattern.
stock | 7000122222 |
---|---|
Part Number | 42544 |
UPC | 00051115425448 |
Unit of Measure | EA |
Max RPM | 15000 none |
Attachment Type | Shaft |
Diameter | 2 |
Backing Material | Non-Woven |
Diameter Metric | 50.8 |
Form Type | Combi |
Grade | Very Fine |
Mineral Type | Aluminum Oxide |
Shank Size | 0.25 in |
Shank Size Metric | 6.35 mm |
Shape | Wheel |
Diameter | 2 |
Width | 1 |
Width Metric | 25.4 |
Benefit1 | Blends, cleans, and finishes on ferrous and non-ferrous materials when a linear scratch pattern is required |
Grit | 120 |
Benefit2 | Useful for satin finishing on large contoured surfaces |
Benefit3 | Resin coated non-woven mesh material runs cool and resists smearing |
Benefit4 | 1/4? (6mm) permanently affixed shank enables easy use on a small straight grinder or flat finisher (for larger wheels) |
Benefit5 | Steel shank helps maintain smooth running and ease of control for off-hand operations |
Benefit6 | Addition of coated flaps produces a sharper cut than a completely non-woven brush |
Shank Size | 0.25 in |
Shape | Wheel |
Type | simple |
Product Form | Wheel |
Shelf Life | 3650 |
MSDS Sheets | https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMYtZnx2B4v70k17zHvu9lxtD7SSSSSS-- |