3M™ Adhesive Transfer Tape 950, Clear, 6 in x 60 yd, 5 mil, 8 rolls per case
$270.59
Availability: Make-to-order Ships in approximately 14 days.
- Buy 40 for $262.07 each and save 3%
- Buy 80 for $251.41 each and save 7%
3M™ Adhesive Transfer Tape 950 is a 300 high strength acrylic adhesive on a 3.5 mil, 60 lb densified kraft paper liner.
Manufacturer
3M
SKU
70006226826
Selling Unit
Rolls
Part
37730
UPC
021200377303
Stock
7000123749
Grand Total : $2,164.72
Large selection of high quality laminating adhesives for graphic attachment and decorative trim applications.
3M™ Adhesive Transfer Tapes are rolls of pressure-sensitive adhesive pre-applied to a special release liner. For application, the tape is simply pressed, adhesive side down, to a surface and the liner is peeled off.
3M™ Adhesive Transfer Tapes are rolls of pressure-sensitive adhesive pre-applied to a special release liner. For application, the tape is simply pressed, adhesive side down, to a surface and the liner is peeled off.
| stock | 7000123749 |
|---|---|
| Part Number | 37730 |
| UPC | 021200377303 |
| Unit of Measure | Rolls |
| UPC 11 | 02120037730 |
| UPC Number | 021200377303 |
| Color | Clear |
| Thickness | 5 mil |
| Length | 60 yd |
| Length Metric | 54.86 m |
| Thickness Metric | 0.1 mm |
| Width | 6 in |
| Width Metric | 152.4 mm |
| Benefit1 | |
| Benefit2 | Good UV resistance. Good chemical resistance. Ideal for high surface energy (HSE) and low surface energy (LSE) materials. |
| Benefit3 | Used as a general purpose transfer tape for a variety of high tack, thin applications. Ideal for a wide variety of similar and dissimilar materials where an aggressive adhesive with high initial adhesion is desired. Splicing of film, foils, fabrics. Lamin |
| Benefit4 | General Industrial Applications |
| Benefit5 | This is good for adhering, joining, affixing, bonding, mounting, holding, laminating, and attaching foams and gaskets. High adhesion custom labeling. Attaching gaskets and a variety of foams. Foam lamination to various surfaces |
| Color 1 | Clear |
| Dimension 1 | 6 in |
| Dimension 2 | 60 yd |
| Adhesion To Foam | 9 |
| Adhesion To Hse | 9 |
| Adhesion To Lse | 9 |
| Adhesion To Metal | 7 |
| Adhesive Peel Initial | 6 |
| Adhesive Peel Ultimate | 7 |
| Adhesive Thickness (mils) | 5 Milli-inch (mil) |
| Adhesive Type | 300 High-Strength Acrylic |
| Carrier Thickness (mils) | >=0 Milli-inch (mil) |
| Chemical Resistance | 6 |
| China Rohs Below Mcv | Yes |
| Type | simple |
| Eu Rohs Compliant | Yes |
| Faceside Adhseive Type | 300 High-Strength Acrylic |
| Humidty Resistance | 8 |
| Liner Color | Tan |
| Liner Thickness | 3.5 Milli-inch (mil) |
| Liner Type | 60 Densified Kraft Paper DK |
| Liner Weight | 60 |
| Master Size Length | 180 Linear Yard |
| Master Size Width | 48 Inch |
| Maxmum Operating Temperature (celsius) | 121 Degree Celsius |
| Maximum Operating Temperature (fahrenheit) | 250 Degree Fahrenheit |
| Minimum Operating Temperature (fahrenheit) | -40 Degree Fahrenheit |
| Moisture Resistance | Medium |
| Nominal Adhesive Thickness (mils) | 5 Milli-inch (mil) |
| Plasticizer Resistance | Low |
| Primary Liner | 60 Densified Kraft Paper |
| Primary Liner Thicknes (mils) | 3.5 Milli-inch (mil) |
| Product Form | Roll |
| Secondary Liner | Not Applicable |
| Shear Strength At 72 Degrees F | 4 Pound-Force Per Square Inch |
| Solvent Resistance | 6 |
| Tape Type | Adhesive Transfer |
| Uv Resistance | Medium |
| Per Case | 8 |
| TDS Files | 3M/tds/129752a.pdf |